Triple Capacitor Relay Harness

Triple Capcitor Relay Harness
The only relay harness that has three capacitors, with two capacitors that even out the voltage going into the ballast making sure that the ballast gets clean voltage that will extend the ballast life overtime.
The input of the harness also has a capacitor, this makes the relay stay on even when the vehicle gives an uneven voltage common on vehicles with DRL. The special DRL ground connection on the input allows many DRL to work perfectly with this harness. A new combination of electrical components on the input side allows people to connect this harness without worrying about popping the capacitor.

Triple Capacitor Harness:
The triple capacitor harness has three capacitors. One capacitor is on the input, this allows this harness to be able to be used with many Dodge vehicles. The input also has a special ground cable that allows this harness to work with many vehicles that have DRL (daytime running lights) without the flickering you see with other harnesses.

The other two capacitors are in the output and this gives the ballasts a pure voltage and overtime will extend the life of the ballasts and make sure both ballasts turn on when they should. No more turning on and off your lights to get the ballasts to fire up.

The harness only needs one relay because of the capacitors use of evening out the voltage for ballasts of 35w and 55w power. Anything higher we would not recommend.

This harness can be used with most HID bulb sizes, not just 9005 or 9006, but if the HID bulbs have a power wire that utilizes the 9006 female connectors with yellow waterproof grommets. This will work with all of the Xenonsplus, Morimoto, GP Thunder Pro bulbs: H1 (not Morimoto), H3, H7, H8, H9, H10, H11, 9005, 9006, 9012, 9145, D2H.