2018-2019 Toyota Camry XSE SE Distantxtremes Auto Fog Light Relay Harness
SKU:
$85.00
$74.99 - $95.00
$74.99
On Sale
per item
SE Harnesses are custom made and require one week build time.
Harness is plug n play, No Splicing Required,
For: 2018-2020 XSE (XLE) or SE (TRD) Toyota Camry Vehicles
NOTE: There is a high chance that XLE Camry's use XSE Harness and TRD Camry's will use SE Harness. We have not tested this yet, but the headlights are very similar.
May not work for Japanese made Camry's (Vin starting with the letter "J").
Included:
1 x Harness of your selection. (You only need 1 harness for 1 vehicle)
1x AFN Adapter (Fogs on with high beams.)
1x AFF Adapter (Fogs off with high beams.)
Made in USA with imported components. All in stock.
To see differences in the AFF+AFN Harnesses click the Options tab below.
Installation
Gray Connectors: (XSE =Easy, SE = Not Easy)
Step 1: Locate the factory gray connectors going to your headlights and unplug them.
Step 2: Plug in the gray connectors from this harness into those connectors, 1 going to headlight, 1 going to vehicle.
Step 3: Make sure they click, make sure metal pins and slots align when connecting.
Step 1: Locate the factory gray connectors going to your headlights and unplug them.
Step 2: Plug in the gray connectors from this harness into those connectors, 1 going to headlight, 1 going to vehicle.
Step 3: Make sure they click, make sure metal pins and slots align when connecting.
Notice: The H11 harness connectors have the red wires for positive and black wires for negative, be sure to match these up with your fog lights correctly. Some harness connectors have been modified by removing the plastic table in the middle of the connector. When you remove that tab in the middle of the connectors it allows you to be able to flip the connectors to change polarity if your lights do not work. Some harnesses may slip by us not modified, you will be responsible to trim the middle of the connector to allow it to be flipped if need be. If you get a harness like this contact us to let us know about this with pictures and we will give you a $10 credit to a future purchase on our website.
|
Picture of modified connector showing middle tab trimmed out.
|
Picture of an unmodified connector with tab in middle of connector.
|
This is a custom made plug n play relay harness for the 2018-2020 Toyota Camry XSE or SE.
The harness will be final assembled here in USA and will take about 1 week to make.
With the harness connected, your fog lights will turn on with your side marker lights.
XSE Harnesses are easier to build than SE harnesses so we have already hired several harness makers and they are building these every day. We have many of the XSE harnesses in stock ready to ship.
The harness will be final assembled here in USA and will take about 1 week to make.
With the harness connected, your fog lights will turn on with your side marker lights.
XSE Harnesses are easier to build than SE harnesses so we have already hired several harness makers and they are building these every day. We have many of the XSE harnesses in stock ready to ship.
AFN: (Not street legal in all states because it leaves your fog lights on with your high beams)
Auto lights On/DRL On = Fog lights Off
Auto lights On/Headlights On = Fog lights On
Auto lights On/High beams On = Fog lights On
Auto lights Off/Corner lights On = Fog lights On
Auto lights Off/Headlights On = Fog lights On
Auto lights Off/High beams On = Fog lights On
All Lights Off = Fog lights Off
AFF: (Turns off your fog lights when you turn on your high beams)
Auto lights On/DRL On = Fog lights Off
Auto lights On/Headlights On = Fog lights On
Auto lights On/High beams On = Fog lights Off
Auto lights Off/Corner lights On = Fog lights On
Auto lights Off/Headlights On = Fog lights On
Auto lights Off/High beams On = Fog lights Off
All Lights Off = Fog lights Off
Harness AFF+AFN: (You can pick if you want fogs on or off with your high beams)
Note: This harness gives you the ability to change if you want your fogs to stay on with your high beams or turn off with your high beams. It has both the AFF Module and the AFN Wire Loop connector that you can connect to the harness. If you want your fogs off with your high beams, just connect the AFF Module to the harness. Tired of that and want your fogs to stay on with your high beams, disconnect the AFF Module and connect the AFN Wire Loop connector. You have both harnesses on one with your choice of connecting which module.
Auto lights On/DRL On = Fog lights Off
Auto lights On/Headlights On = Fog lights On
Auto lights On/High beams On = Fog lights On
Auto lights Off/Corner lights On = Fog lights On
Auto lights Off/Headlights On = Fog lights On
Auto lights Off/High beams On = Fog lights On
All Lights Off = Fog lights Off
AFF: (Turns off your fog lights when you turn on your high beams)
Auto lights On/DRL On = Fog lights Off
Auto lights On/Headlights On = Fog lights On
Auto lights On/High beams On = Fog lights Off
Auto lights Off/Corner lights On = Fog lights On
Auto lights Off/Headlights On = Fog lights On
Auto lights Off/High beams On = Fog lights Off
All Lights Off = Fog lights Off
Harness AFF+AFN: (You can pick if you want fogs on or off with your high beams)
Note: This harness gives you the ability to change if you want your fogs to stay on with your high beams or turn off with your high beams. It has both the AFF Module and the AFN Wire Loop connector that you can connect to the harness. If you want your fogs off with your high beams, just connect the AFF Module to the harness. Tired of that and want your fogs to stay on with your high beams, disconnect the AFF Module and connect the AFN Wire Loop connector. You have both harnesses on one with your choice of connecting which module.
What does this harness do?
This harness allows you to turn on your fog lights without running a manual switch through the firewall.
This allows the driver to never have to worry about if the fog lights are on or worry about running the battery down because they accidentally left the fog lights on.
This harness will automatically turn on the fog lights when the vehicles lights are on and off when the vehicles lights turn off.
This harness is specially designed for 2018-2020 XSE Camry with LED DRL or the 2018-2020 Camry SE without LED DRL based on your selection.
Connectors on the harness is a Toyota OEM Female and Male connector that connects in between your headlight connector. The other connectors are H11 that connect into the fog lights.
One harness for one vehicle. One harness powers two fog lights.
Will this fit the XLE or LE?
This has not been tested on the other vehicle trims, such as XLE, LE, etc so it is unknown if this harness works on those platforms.
Why does the SE AFF Harness cost more than the XSE AFF Harness?
The SE uses more connectors. This increases cost of wires uses, and the cost of the extra connectors.
The SE uses 2 connectors to Plug n' Play tap into for the fog lights off with high beam.
The XSE uses 1 connector to Plug n' Play tap into for the fog lights off with high beam.
The SE uses 1 connector to Plug n' Play tap into for the fogs lights on with high beam.
The XSE uses 1 connector to Plug n' Play tap into for the fogs lights on with high beam.
This harness allows you to turn on your fog lights without running a manual switch through the firewall.
This allows the driver to never have to worry about if the fog lights are on or worry about running the battery down because they accidentally left the fog lights on.
This harness will automatically turn on the fog lights when the vehicles lights are on and off when the vehicles lights turn off.
This harness is specially designed for 2018-2020 XSE Camry with LED DRL or the 2018-2020 Camry SE without LED DRL based on your selection.
Connectors on the harness is a Toyota OEM Female and Male connector that connects in between your headlight connector. The other connectors are H11 that connect into the fog lights.
One harness for one vehicle. One harness powers two fog lights.
Will this fit the XLE or LE?
This has not been tested on the other vehicle trims, such as XLE, LE, etc so it is unknown if this harness works on those platforms.
Why does the SE AFF Harness cost more than the XSE AFF Harness?
The SE uses more connectors. This increases cost of wires uses, and the cost of the extra connectors.
The SE uses 2 connectors to Plug n' Play tap into for the fog lights off with high beam.
The XSE uses 1 connector to Plug n' Play tap into for the fog lights off with high beam.
The SE uses 1 connector to Plug n' Play tap into for the fogs lights on with high beam.
The XSE uses 1 connector to Plug n' Play tap into for the fogs lights on with high beam.
