9006 Hylux HID Upgrade System
SKU:
$140.00
$140.00 - $160.00
per item
The 9006 Hylux HID Upgrade System is the newest introduction into the world of high quality HID.
(image may vary)
Safety
To maximize safety for a bulb to ballast system without any extra relay harness the ballast we use have to have a cold start of 6.5A or less and a steady current of 2.5A +/- 1A. The ballast we have chosen with this system matches those parameters. The 50w ballast does not match those parameters thus you NEED to use the relay harness with the 50w ballast or else you will cause damage to your vehicle.
Brightness
With the 5500K color and 35w HID ballasts the total lumen output is 3800LM per lamp.
With the 6500K color and 35w HID ballasts the total lumen output is 3500LM per lamp.
Even Brighter
Adding a 50w Ballast with your kit will automatically add a relay harness for your system since the 50w ballast is not safe alone on the vehicle electronics without the assistance of the relay harness.
With the 5500K color and 50w HID ballasts the total lumen output is 4560LM per lamp.
With the 6500K color and 50w HID ballasts the total lumen output is 4200LM per lamp.
Included with your H11 Hylux HID Upgrade Kit
2x 9006 35w AC HID YEAKY Ultra HID bulbs in either 5500K or 6500K color option
2x Hyluxtek 35w Canbus ballast (If you choose 50w version you get 2x 50w Hyluxtek ballasts and 1x HD dual relay harness)
Installation
A 7/8" hole may need to be drilled into the back cap of your headlamp to fit the waterproof wire grommet through that is attached to the HID bulbs. Connect the rectangle black plastic connector into the factory connector that was connecting into the stock bulb. Install the new HID bulb. Plug the AMP connectors with red and white wire from the bulb into the HID ballast. If the 35w ballast is used, connect the remanding connector with red and black wire and yellow grommet into the ballast input. If the 50w ballast is used, connect the remanding connector with red and black wire and yellow grommet into the input of the relay harness that came with your system. The outputs of the harness connects to the 50w ballasts. For the 50w harness finish connecting the wires that go to the (+) and (-) of the battery/fuse panel.
Warranty
For the 35w HID system a 5 year warranty is included.
For the 50w HID system a 3 year warranty is included.
(image may vary)
Safety
To maximize safety for a bulb to ballast system without any extra relay harness the ballast we use have to have a cold start of 6.5A or less and a steady current of 2.5A +/- 1A. The ballast we have chosen with this system matches those parameters. The 50w ballast does not match those parameters thus you NEED to use the relay harness with the 50w ballast or else you will cause damage to your vehicle.
Brightness
With the 5500K color and 35w HID ballasts the total lumen output is 3800LM per lamp.
With the 6500K color and 35w HID ballasts the total lumen output is 3500LM per lamp.
Even Brighter
Adding a 50w Ballast with your kit will automatically add a relay harness for your system since the 50w ballast is not safe alone on the vehicle electronics without the assistance of the relay harness.
With the 5500K color and 50w HID ballasts the total lumen output is 4560LM per lamp.
With the 6500K color and 50w HID ballasts the total lumen output is 4200LM per lamp.
Included with your H11 Hylux HID Upgrade Kit
2x 9006 35w AC HID YEAKY Ultra HID bulbs in either 5500K or 6500K color option
2x Hyluxtek 35w Canbus ballast (If you choose 50w version you get 2x 50w Hyluxtek ballasts and 1x HD dual relay harness)
Installation
A 7/8" hole may need to be drilled into the back cap of your headlamp to fit the waterproof wire grommet through that is attached to the HID bulbs. Connect the rectangle black plastic connector into the factory connector that was connecting into the stock bulb. Install the new HID bulb. Plug the AMP connectors with red and white wire from the bulb into the HID ballast. If the 35w ballast is used, connect the remanding connector with red and black wire and yellow grommet into the ballast input. If the 50w ballast is used, connect the remanding connector with red and black wire and yellow grommet into the input of the relay harness that came with your system. The outputs of the harness connects to the 50w ballasts. For the 50w harness finish connecting the wires that go to the (+) and (-) of the battery/fuse panel.
Warranty
For the 35w HID system a 5 year warranty is included.
For the 50w HID system a 3 year warranty is included.
