Morimoto LED Load Resistor
SKU:
$7.50
$7.50
per item
Included
1x Resistor: Morimoto LED Load Resistor
2x Splices: Crimp + T-Tap.
Just Better: Hardly cheap in comparison, the Morimoto Heavy Duty Load Resistors may do the same thing as a cheap golden resistor, but they'll stay cooler, last longer, and look better doing it!
Don't Skimp: You've got yourself a nice and expensive set of dual-intensity or switchback LED bulbs, etc....why skimp out on the resistors that are sometimes required to keep your car happy while running them? Nobody likes hyperflash.
Safety First: As a component that's notorious for getting extremely hot when in use, it's not only careless to use a cheaply made part, its dangerous.
Construction: Using two cement resistors housed inside of an anodized aluminum heat-sink, sealed on both ends and then wired using thick 14 gauge wiring and high quality terminals: from end to end the Morimoto HD load resistors are worlds better than your average "golden resistor"
Tap that: Includes the necessary crimp-on wire taps and male terminals to easily tap between the +/- inputs to your bulb and fix the problem.
Mounting: Integrated mounting points should be used to mount the resistor shell to a metal surface under the hood. Must be mounted out of harms way and should not touch any plastic or other wiring.
1x Resistor: Morimoto LED Load Resistor
2x Splices: Crimp + T-Tap.
Just Better: Hardly cheap in comparison, the Morimoto Heavy Duty Load Resistors may do the same thing as a cheap golden resistor, but they'll stay cooler, last longer, and look better doing it!
Don't Skimp: You've got yourself a nice and expensive set of dual-intensity or switchback LED bulbs, etc....why skimp out on the resistors that are sometimes required to keep your car happy while running them? Nobody likes hyperflash.
Safety First: As a component that's notorious for getting extremely hot when in use, it's not only careless to use a cheaply made part, its dangerous.
Construction: Using two cement resistors housed inside of an anodized aluminum heat-sink, sealed on both ends and then wired using thick 14 gauge wiring and high quality terminals: from end to end the Morimoto HD load resistors are worlds better than your average "golden resistor"
Tap that: Includes the necessary crimp-on wire taps and male terminals to easily tap between the +/- inputs to your bulb and fix the problem.
Mounting: Integrated mounting points should be used to mount the resistor shell to a metal surface under the hood. Must be mounted out of harms way and should not touch any plastic or other wiring.
